Waste tire recycling production line / waste tire recycling into rubber crumbs / waste tire recycling

High output rubber tire recycling machine/waste tire shredder recycling lineThe waste tire recycling machine is a piece of new innovative equipment. Rubber powder production line is used for processing used tires and rubbers to fine rubber powders.  End product size can reach 30-120 mesh free of steel wire and fiber.  

Featured Products

High output rubber tire recycling machine/waste tire shredder recycling line



The waste tire recycling machine is a piece of new innovative equipment. Rubber powder production line is used for processing used tires and rubbers to fine rubber powders. 
End product size can reach 30-120 mesh free of steel wire and fiber.

 Product Description
waste tyre -- tyre debeader -- tyre cutting machine -- whole tyre shredder -- big conveyor equipment -- rubber crusher -- big shaking screen -- small conveyor equipment -- magnetic separator -- small shaking screen -- fiber separator -- 5-30 mesh powder -- rubber fine grinder -- 40-120 mesh powder. 
 

Tire debeader
  
 
  

The first step in tire recycling procession
Heavy duty body
Hooks and cross pulling die made of 45# steel, tempered and quenched
Equipped with protection frame avoiding the dangers during working
Two series: hydraulic one and mechanic one
Easy to operate and change spare parts (hooks and cross pulling die)

Tire cutter
 
 

Cutting tires into pieces before shredding
Small tire pieces are easier to process in shredder
Knives made of YG-20 steel, long using time
Hydraulic control
One clamping cylinder and one cutting cylinder
Equipped with a roller platform to process big tires

Tire shredder
   
 
  

The high-capacity shredder was specially developed for direct size reduction of tires into cleanly cut tire chips, size 50x50 mm. cutting shafts for the production of larger tire chips are available high torque at low speed cut even the strongest tires into pieces.
All construction characteristics are designed for continuous operation in order to achieve highest throughput rates at lowest costs.
Extremely precise tolerances between the cutting knives produce cleanly cut tire chips at low energy consumption.
The cutting knives made of high quality alloy steel can be re-sharpened and reused which increases the service life and reduces the operating costs.
The complete cutting chamber is lined with hard wear plates.
Large doors allow for easy access into the cutting chamber.

Tire cracker 
  
 
 
 
 
  
  

The shear between the two rollers will make tire chips into powders as well loosen rubbers, steels and textiles
Roller body made of cast steel
Surface of roller made of alloy steel, welded when worn out
One flat surface roller and one teethed roller, high throughput of powders
Bottom made of cast iron
Emergency stop when overload
Distance between the two rollers can be adjusted.
Hard gear gearbox
Equipped with screening machine, magnetic separator and fiber separator, 99% purified rubbers will be got.
Finals: 8-30 mesh

Magnetic separator
  
   
 
  
 

Muti-stage belt style magnetic separator can reach more purified rubbers
Separated steels will be in one place, easy to collect
Permanent magnet, no more power consumption

Fiber separator
  
 
  
 

After the grinder, the nylon wires will be grinded into fluff; According to centrifugal force, density difference, the fluff will be separated.
The spin fans inside the cyclone barrel driven by the motor throw the compounds to the wall, at this time, light fluff will be upwards and fall down into the inside barrel; heavy rubbers will fall down directly, so textiles will be separated

Pulverizing unit
  
 
 

The pulverizing unit is made of 3 sets pulverizers with a cyclone silo.
The pulverizer consists of frame, main motor, non-pole reducer, feeding device, adjusting device and a pair of rotating disc and fixed disc.
The fine powders will be achieved by the grinding and shearing of the two pin discs.
The machine is cooled by water and air to ensure the quality of the powders.
Non-pole reducer can adjust speed of the feeding device to meet the material demands.
The cyclone silo will collect the rubber power without dust
Finals: 30-120 mesh
Waste Tire Recycling Production Line/Recycling Waste Tyre to Rubber Crumb/Waste Tyre Recycling
Waste Tire Recycling Production Line/Recycling Waste Tyre to Rubber Crumb/Waste Tyre Recycling
Waste Tire Recycling Production Line/Recycling Waste Tyre to Rubber Crumb/Waste Tyre Recycling
Waste Tire Recycling Production Line/Recycling Waste Tyre to Rubber Crumb/Waste Tyre Recycling

 About us:
We are one of the biggest manufacturer and exporter of rubber machinery in north of CHINA. it was first established in October, 1976 and had experienced over-30-year history of producing rubber machinery. Owning more than 530 employees, floor area of 58 thousand sqm, building area of 34 thousand sqm and fixed assets of 62.8 million yuan, the company mainly provides light commercial tyres, rubber products and various equipments such as flat vulcanizing machine, banbury mixer, rubber fining mixer, rubber cutting machine, blown-film unit, extruder and tyre building machine.

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours